Share on facebook
10% off

Roller Shutters Rust and Rattling Problems Guide

Have you ever passed a commercial building and seen the rusted metal roller shutter doors on the building’s exterior? It’s not a nice sight. Is it true that shutters made of metal corrode with time?

Yes, that’s the simplest answer. Roller shutters for both residential and commercial use may corrode. But there are things you can do to stop this from happening.

Metal things can break down entirely if they are left untreated for a long period of time. It is thus essential to take preventative measures to avoid it.

Roller shutters are no exception to the rule when it comes to rust, which affects all metal things. Water and oxygen erode the metal, which leads to rust.

Rust develops when metal is left exposed to moisture and oxygen. Rust is a nuisance, but it can be prevented with a little bit of attention.

If you want to prevent your security roller shutters from rusting, there are many things you can do.

Roller Shutter Rust Preventative Measures

When it comes to aesthetics, experts say roller shutters are undervalued. Their project is so well-known as an industrial showpiece that several towns across the globe have prohibited it because it promotes aesthetics above public safety.

Rust and other unattractive occurrences may happen if proper care is not taken. Roller shutters aren’t simply for security anymore, as we’d like to point out here at this trusted provider.

Find more

Roller Shutters

What Causes the Rusty Coloration of Roller Shutters?

Aluminum is the most common metal used in roller shutters. Throughout the year, they are subjected to a wide range of weather conditions, including heat records in the summer and temperatures far below zero in the winter.

Rain, sleet, and snow hit our roller shutters all the time, especially here in Melbourne. Metal surfaces may rust under any of these meteorological conditions.

Due to how easy it is for aluminum to rust, the metal coating on blinds may deteriorate quickly if it is not taken care of.

“Corrosion vs. Rust: What’s the Difference?”

Ferrous metals, which include iron, are more susceptible to rusting than non-ferrous metals. In the presence of oxygen, ferrous metals oxidize and form iron oxide, a reddish-brown chemical.

We often refer to this as “rust.”

But unlike oxidation, which only occurs in iron, corrosion may occur in any metal. Corrosion is a broad term for when a material breaks down because of chemical or electrical reactions.

What is the best way to keep roller shutters from rusting?

Investing in a quality layer of paint or sealer can help keep your metal shutters free of corrosion. Protect your blinds from the elements by reapplying this coating every few years. If you can, keep your shutters clean and dry; any dirt or moisture may lead to rust growth.

Read any more

Roller Shutters

Roller Shutters Rattling in the Wind

The rattling of roller shutter doors may be fairly loud when the wind speeds are strong. If the shutters are old and neglected, the issue may be aggravated.

Depending on the situation, it may just need a few screws to be tightened or a little lubrication. But in other circumstances, you may need to call in the professionals.

Identifying the cause of the rattling noise is critical before beginning any repairs.

What’s Making All That Noise?

Many variables might cause roller shutters to rattle or squeak, including climatic conditions and proper maintenance. You can eliminate the noise and prevent it from occurring again if you know what caused it.

Areas with high winds

Roller shutters might rattle if you reside in a region with strong wind speeds. Older shutters that have not been properly cared for are particularly vulnerable to this.

The Age of the Shutters

The aging process of shutters may cause them to begin to exhibit signs of wear and tear, which can cause them to rattle.

Wooden shutters, which may shrink and bend over time, are particularly susceptible to this. When the shutter is moving, worn-out components might make a rattling noise.

Roller Shutters

Insufficient upkeep

Roller shutters can rattle and produce a loud noise if they are not properly greased and cleaned regularly. The shutter components might be seriously damaged as a result of this over time.

Loose Parts

If there are any loose pieces in the shutter mechanism, the rattling noise might be generated by them in certain circumstances. The screws should be tightened, and worn-out components should be replaced if this is the case.

How to Fix Roller Shutters That Rattle

To remedy the rattling issue, you must first identify the cause of the problem. A few pointers

Make sure nothing is broken or out of place. Examine the shutter mechanism to see if any pieces are loose before proceeding with the rest of the procedure.

Inspect the slats, bars, wheels, gears, and any other components to verify that all of them are still in excellent shape and free of damage and dents.

If they are loose, it is possible that they are broken and will need to be replaced. The bolt portion should also be checked for any rattling caused by dust particles obstructing the bolt.

The screws should be tightened and any broken components replaced if necessary.

Perform regular maintenance

One of the most effective strategies to keep roller shutters from rattling is to perform regular maintenance. Your shutter needs to be taken care of regularly if you want to keep it in good shape. Debris and dirt will not accumulate if you clean your roller shutters regularly.

When living in an area with a lot of wind, you should clean them every three to four months. Moving components must be lubricated, and the shutter mechanism must be cleaned.

If you find that the condition has severely deteriorated, you will need to contract roller shutters professionals. 

Recommended for you

Leave a Reply

Email Newsletter

Subscribe to receive inspiration, ideas, and news in your inbox

popular